High carbon spring steel wire

spring steel wire (1)Standard:DIN17223-1-1984,EN10270-1,ASTM-A227,GB4357-89 (2)Size: 0.20mm-14.0mm (3)multi-purpose in usage

spring steel wire

	DIAMETER (MM)	TENSILE STRENGTH(MPa)	TORSIONS Min./360°
1	0.30mm	2010-3000	20
2	0.45mm	2200-2600	20
3	0.50mm	2200-2600	20
4	0.55mm	2150-2550	20
5	0.60mm	2110-2500	20
6	0.70mm	2060-2450	20
7	0.80mm	2010-2400	20
8	0.90mm	2010-2350	20
9	1.00mm	1960-2300	20
10	1.20mm	1910-2250	20
11	1.40mm	1860-2210	20
12	1.60mm	1810-2160	20
13	1.80mm	1760-2110	15
14	2.00mm	1710-2010	15
15	2.30mm	1660-1960	15
16	2.60mm	1660-1960	15
17	2.90mm	1620-1910	12
18	3.20mm	1570-1860	12
19	3.60mm	1570-1810	12
20	4.00mm	1570-1810
21	4.50mm	1520-1710
22	5.00mm	1470-1710
23	5.50mm	1470-1710
24	6.0mm-8.0mm	1370-1660
25	9.0mm-14.0mm	1130-1420

1. General introduction:

Raw material is rigorously selected and approved before put into processing while five main chemical compostion results shown as below:

C	Si	Mn	P	S
0.40-1.00	Max 0.35	0.30-1.50	Max 0.04	Max 0.04

Conventional technique integrated with modern leading-edged equipment makes our finished products shines on comprehensive functioning and performance when adoped. For serving spring and wire form industry, high tensile strength is not the ultimate goal to pursue, but the balance of flexibility and tensile strength to prevent our wire from deformed or broken up during winding in spring machine. In addition, for other usage, our products also have gained a sound reputation from the appliance as controlling cable or connecting wire for automobile industry and hard needle. Hot-dipped and electro-galvanized spring wire available.

2. Range of application:

    (1). mattress spring

    (2). compression spring

    (3). extension spring

    (4). torsion spring

    (5). mechanical spring

    (6). wire forms

    (7). core of controlling cable

    (8). connecting wire

    (9). hard needle

3. Specifications:

    (1). 0.30mm-13.00mm to comply with DIN17223-1-1984 Class B

    (2). 0.30mm-3.50mm to comply with DIN1723-1-1984, Class C, EN10270-SH

    (3). 0.30mm-2.00mm to comply with DIN1723-1-1984 Class D

    (4). 0.30mm-13.00mm to comply with ASTM-A227 grade I and II

    (5). lightly-oiled or heavily-oiled subject to requirement.

    (6). Other standards are subject to requirements, such JIS, AS or GB

High carbon spring steel wire